Opener Brands We Repair
Four brands cover almost every opener in the Santa Clarita Valley. We keep the common sensors, gears, remotes and boards on the truck for all of them.
LiftMaster opener repair
The door starts down and comes straight back up. On LiftMaster units the safety reversing sensors are the first thing to check: both indicator lights should be steady, and a flicker means the pair has lost sight of each other.
A remote or keypad that stopped working after a power cut, which usually means the unit lost its programming rather than the remote failing.
Chamberlain opener repair
The same reversing-sensor fault as LiftMaster, since both are built by the Chamberlain Group and share the sensor design.
Remotes that lose their pairing, and keypads whose entry code has been wiped.
Genie opener repair
The door will not close and the opener light flashes. Genie's Safe-T-Beam pair is the usual cause: the source sensor should show a steady red LED and the receiver a steady green one, and a flashing LED is the fault code.
Sensors knocked out of alignment, or mounted higher than the few inches from the floor Genie specifies.
Craftsman opener repair
A remote that will not work — usually a flat battery, lost programming, or interference from newer LED bulbs in the garage.
The door reverses or refuses to close, from misaligned or dusty floor-level sensors.
What an opener repair usually costs
HomeAdvisor puts opener repair at an average of $235, and most jobs typically run $150-$300 whichever of the four is on your ceiling. What decides the number is which part failed, not the badge on the powerhead: sensors, remotes, keypads, drive gears, limit switches, capacitors and wiring are all repairable, and between them they cover the large majority of opener calls. We diagnose the unit on site and write the price down before starting.
Repair or replace
Replacement becomes the better value when the motor or the logic board has gone on an older unit, or when parts for a discontinued model are no longer made. Age on its own is not a reason. Opener repair → · Opener replacement →
Not sure which brand you have?
It does not change the booking. The brand narrows what we load on the truck, but the symptom is what decides the repair — describe what the opener is doing when you call and we will work it out from there.